Hot dip galvanized chassis 2CV since 04/70
This 2CV chassis fits on 2CV since april 1970, but also on Dyane or Méhari.
This body part piece is hot dip galvanized in a 450°C bath, wich leads to slight deformations of the top and bottom metal sheets.
The galvanisation is happening to the end at the construction of the chassis, so it's common to have to re-drill or tap again some holes (the galvanising layer is thick enough for good protection of the chassis).
You have to protect these chassis with cavity wax and a surface painting so that the guarantee is still applicable.
The floor supports are delivered to be welded on the chassis to avoid that they are being damaged during transport.
For the Benelux countries (Belgium, Netherlands, Luxembourg, germany), chassis are sold with a TUV approval certificate. In France, it's not mandatory. For the vehicles of 30 years old or more, the absence of chassis number can't be a reason for refulsal at the technical control. So you are not mandatory to punch your number.
Informations complémentaires
Véhicules
2CV4 - 2CV6
DYANE
MEHARI
DYANE
MEHARI
Conditionnement
La pièce
Référence d'origine Citroën
Volumineux
Oui
Remisable
Non
€885.00
Tax included
D8140
PARTAGER:
This 2CV chassis is hot dip galvanized, and it fits on 2CV since april 1970 and also on Dyane or Méhari
Please protect it with cavity wax and a surface painting.
You may have to re-drill or tap some holes.
YOU MIGHT ALSO BE INTERESTED IN THE FOLLOWING PRODUCT(S)
This 2CV chassis is hot dip galvanized, and it fits on 2CV since april 1970 and also on Dyane or Méhari
Please protect it with cavity wax and a surface painting.
You may have to re-drill or tap some holes.