Matte black paint 400 ml

BESA SPRAY NEGRO MATE J-13 – matt black 400 ml

BESA SPRAY NEGRO MATE J-13 is a fast-drying matt black enamel for interior and exterior use. The manufacturer intends it for touching up and finishing small bodywork parts and for other industrial work.

Features

• colour: J-13 matt black;
• pack size: 400 ml aerosol;
• high coverage and good body;
• matt appearance;
• can be applied to properly derusted and degreased steel;
• professional use stated by the manufacturer.

Preparation and application

1. On steel, properly derust and degrease the surface.
2. On old paint, sand and degrease first.
3. Shake the aerosol for 2 to 3 minutes.
4. Apply 2 to 3 coats from 20–30 cm, leaving 5 to 10 minutes between coats.
5. After use, invert the aerosol and clean the valve.

The manufacturer states approximately 45 minutes drying at 20°C and overcoating after 24 hours. For better adhesion and substrate protection, BESA states that F-29 or F-809 primer may be applied first. Do not apply over synthetic alkyd-based paints.

Follow the label and manufacturer sheet for precise application requirements and use suitable protection.

Identification

• brand: BESA;
• manufacturer product: SPRAY NEGRO MATE J-13;
• Retro Design reference: U420167;
• pack size: 400 ml aerosol.