- Home
- Citroën 2CV
- Autres Citroën
- ALL VEHICLES
- IGNITION
- EXHAUST
- FUEL CIRCUIT
- BRAKING
- LIGHTING
- INTERIOR EQUIPMENT
- ELECTRICITY
- RETROSOUND CAR RADIOS
- HOSES
- EXTERIOR ACCESSORIES
- WHEELS - TIRES
- FILTRATION
- BODYWORK
- HEATING - VENTILATION
- OIL CIRCUIT
- COLLARS, FITTINGS, END CAPS
- LICENSE PLATES
- INSTRUMENTATIONS
- MAINTENANCE
- SHOP
- Catalogs
Complete suspension cylinder diameter 13cm
This top quality suspension cylinder is in steel and is sold complete.
- Diameter : 13 cm
This suspension piece was made for the last AK400 but fits also on old AK400, AK350, Ami 6 and Ami 8. However, this suspension cylinder won't fit on Acadiane because the rear tube rod is too short.
It mounts without suspension cylinder stops but rather with aluminum cones.
Conseil d'entretien :
Your 2CV suspension cylinder make noises ? No grease needed ! Drill a small tapped at the top of the cylinder, pour a few drops of engine oil and close with a screw cut flush.
There are 2 suspension cylinders by vehicle and there are positionned horizontally each side of the chassis. Each suspension cylinder is connected to a front wheel and a rear wheel via the suspension arms and move back and forth thanks to the 2 springs that compose it. A suspension cylinder allow the car to keep contact with the ground, while the shock absorber absorb shocks. The suspension cylinder allow also to adjust the hight of your 2CV.
Informations complémentaires
AMI 6
AMI 8
That suspension cylinder all equiped is in steel and has a diameter of 13cm. It's a good quality and it fits on AK350, AK400 and Ami 6/8 (except for Acadiane because the rear tube rod is too short).
YOU MIGHT ALSO BE INTERESTED IN THE FOLLOWING PRODUCT(S)